Keysight N5247-60113 Скачать руководство пользователя страница 7

Страница: 7 / 76

Installation Note N5247-90113 7

Getting Prepared

License Key Redemption

To enable the option product, you must request license key files(s) from the

Keysight Software Manager:

http://www.keysight.com/find/softwaremanager

To complete the request, you will need to gather the following information:

— From the certificate

— Order number
— Certificate number

— From your instrument

— Model number
— Serial number

Using the information just gathered, you must request license key file(s) from

the Keysight Software Manager:

http://www.keysight.com/find/softwaremanager

You will need to provide an email address, Keysight will promptly email you

icense key file(s) as a message attachment.

Verify the License Contents

Refer to the license message you received from Keysight:
If the model number, serial number, or option number do not match those on

the license message you received from Keysight, you will not be able to install

the license key file. If this is the case you received from Keysight, you will not

be able to install the license key file. If this is the case, contact Keysight for

assistance. Refer to

“Getting Assistance from Keysight” on page 5

Ensure that you are connected to an external server, before attempting to

download your email and license key file.
If you are unfamiliar with the licensing process, refer to

https://www.keysight.com/us/en/assets/9018-04534/installation-guides

/9018-04534.pdf

(N5242-90024).

The enclosed Software Entitlement Certificate is a receipt, verifying that

you have purchased a licensed option for the PNA of your choice. You must

now use a Keysight Web page to request a license key for the instrument

that will receive the option.

Содержание N5247-60113













































































Результаты поиска

Содержание N5247-60113

Отзывы:

Похожие инструкции для N5247-60113

Бренды по названию

Популярные бренды

Keysight N5247-60113, Руководство по установке

Результаты поиска

Содержание N5247-60113

Отзывы:

Похожие инструкции для N5247-60113

Бренды по названию

Популярные бренды