Keysight N5241BU-205 Скачать руководство пользователя страница 47

Страница: 47 / 60

Installation Note N5242-90125 47

Description of the Upgrade
Installation Procedure for the Upgrade

Step 28. Position the Cables and Wires to Prevent Pinching

On the top side of the PNA, carefully position the gray flex cables so they can’t

be pinched between the covers and the rails.
On the bottom side of the PNA, carefully fold or push down the ribbon cables

and wires so they can’t be pinched between the hardware and the outer cover.

Ribbon cables and wires must never be positioned on top of hardware.

Step 29. Reinstall the Inner Cover

For instructions, click the Chapter 7 bookmark “Removing the Covers” in the
PDF Service Guide

Step 30. Reinstall the Outer Cover

For instructions, click the Chapter 7 bookmark “Removing the Covers” in the
PDF Service Guide

Step 31. Remove Option 201 License

Procedure Requirements

— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must

not

be running.

— A keyboard and mouse must be connected to the network analyzer.

Option 201 License Removal Procedure

To start the Keysight License Manager 6, press

Start > Keysight License

Manager > Keysight License Manager

. A Keysight License Manager dialog

box will appear.

Right click the on the desired option and click

Delete

In the Keysight License Manager dialog box that appears, press or click

Yes

to confirm delete.

A message displays stating that the option removal was successful.

Содержание N5241BU-205





























































Результаты поиска

Содержание N5241BU-205

Отзывы:

Похожие инструкции для N5241BU-205

Бренды по названию

Популярные бренды

Keysight N5241BU-205, Установочная инструкция

Результаты поиска

Содержание N5241BU-205

Отзывы:

Похожие инструкции для N5241BU-205

Бренды по названию

Популярные бренды