Keysight M9384B, Руководство для стартапов, Страница: 34 / 59

Step 3: Prepare and Power up the Signal Generator
Configuring LAN
Configuring LAN
Hostname
The Computer Name, or Hostname, is preconfigured from the factory. It must be a
unique name such that it does not conflict with other equipment on your LAN. The
preconfigured Computer Name is K-<model number>-xxxxx, where xxxxx is the last 5
digits of the instrument’s serial number.
IP Address and Gateway
The instrument is preconfigured to obtain an IP Address via DHCP. You can change
the IP Address and Gateway as you desire.
You must be logged in as an "administrator" (default password:"Keysight4u!") to
make changes.
Connecting to a Network Shared Folder
The instrument contains standard Windows networking. The time required to
authenticate is dependent on your LAN infrastructure. You may have improved
performance by mapping a network drive to the shared folder that you need to
access.
To map a network drive, click Start > System Tools > Computer.
Go to Computer tab, and select Map Network Drive from the drop down menu:
.
In the Map Network Drive dialog, browse to the correct folder, and click Finish.
34 M9384B Startup Guide