Keysight M9384B, Руководство для стартапов, Страница: 30 / 59

Step 3: Prepare and Power up the Signal Generator
User Accounts
Keysight does not warrant the performance of the instruments with non-approved
software installed. If this happens, you should try uninstalling the program that has
caused the problem, or try changing the program's configuration. If this does not
correct the problem, you may have to use the Instrument Recovery system to
reinstall the instrument's system software.
User Accounts
The instrument ships with a number of different accounts already set up. In addition,
you can create your own accounts if you desire. The privileges associated with each
account determine what you can and cannot do from that account.
Administrator Account
The default Administrator password that ships from the factory is "Keysight4u!".
Using the Administrator account, you can perform the following operations:
Install software
Configure network and printer access
Access all files on the instrument
Add or change user accounts and passwords
Change Firewall settings
Change Windows settings (for example, using Device Manager)
Change the time and date
Run any application
Instrument Accounts
The default user account that ships from the factory is “Instrument” with the
password “measure4u”. This user is a member of the standard Users group. Using
the Instrument account, you may perform the following operations:
Configure network and printer access (although not local printer access)
Access files on the instrument that are accessible to the Users group
Run applications that are accessible to the Users group
Customer Creation of Accounts
You can create additional user accounts and decide on the level of security granted
to any new user accounts created. For example, the level of security can be assigned
as administrator, power user, standard user and backup operators. User names are
not case sensitive but passwords are case sensitive.
It is Keysight’s expectation that each user’s My Documents folder is mapped to the
D: drive. This is to avoid overwriting the user’s data in the event the Instrument
30 M9384B Startup Guide