Keysight M9187A, Руководство для стартапов

Страница: 19 / 32

Keysight M9187A PXI Digital IO Startup Guide 19
Step 6. Verify Operation of the Module
Step 6. Verify Operation of the Module
Run Keysight IO Libraries Connection Expert
If Keysight Connection Expert is already running on the system controller, click
the Refresh All button to identify any hardware you have just installed or
re-connected.
If Connection Expert is not already running, run it now to verify your I/O
configuration. In the Windows Notification Area, click the IO icon ( ), then click
Keysight Connection Expert.
Locate your interfaces and instruments in the Keysight Connection Expert
Explorer Pane. The following graphic shows the Connection Expert screen.
Select the module in the center pane (Instrument I/O on this PC). The right-hand
Pane shows the instrument properties. Select the
Installed Drivers
tab
then click the
Start SFP
button. You can use the M9187A Soft Front Panel
(SFP) software to set the outputs read the inputs, and verify operation of the
module. The Soft Front Panel software was installed as part of the Software
installation process.
For detailed instructions for using the M9187A Digital IO module, refer to the
Soft Front Panel help file on the Digital IO Module Software and Product
Information CD.