Keysight M3100A PXIe, Руководство пользователя

Страница: 31 / 92

3 Keysight SD1 Command Reference
Keysight M3100A/M3102A PXIe Digitizer User's Guide 25
3. 3 Functions in SD1 Programming Libraries
The following functions are available in Keysight SD1 Programming Libraries.
SD_Module Functions on page 28
Function Name Comments
open on page 28 Initializes a hardware module and must be called before using
any other module-related function.
close on page 30 Releases all resources that were allocated for a module with
open on page 28 and must always be called before exiting the
application.
moduleCount on page 31 Returns the number of Keysight SD1 modules in the system.
getProductName on page 32 Returns the product name of the specified module.
getSerialNumber on page 33 Returns the serial number of the specified module.
getChassis on page 34 Returns the chassis number of where a module is located.
getSlot on page 35 Returns the slot number of where a module is located.
PXItriggerWrite on page 36 Sets the digital value of a PXI trigger in the PXI backplane.
Only available in PXI/PXI Express form factors.
PXItriggerRead on page 37 Reads the digital value of a PXI trigger in the PXI backplane.
Only available in PXI/PXI Express form factors.
SD_AIN Functions on page 38
Function Name Comments
channelInputConfig on page 38 Configures the input full scale, impedance and coupling.
channelPrescalerConfig on page 39 Configures the input prescaler.
channelTriggerConfig on page 40 Configures the analog trigger block for each channel Analog
Trigger.
DAQconfig on page 41 Configures the acquisition of words in two possible reading
modes.
DAQdigitalTriggerConfig on page 42 Configures the digital hardware triggers for the selected DAQ
Trigger.
DAQanalogTriggerConfig on page 43 Configures the analog hardware trigger for the selected DAQ
Trigger.
DAQread on page 44 Reads the words acquired with the selected DAQ Data
Acquisition (DAQs).
DAQstart on page 46 Starts an acquisition on the selected DAQs Data Acquisition
(DAQs).
DAQstartMultiple on page 47 Starts an acquisition on the selected DAQs Data Acquisition
(DAQs).
DAQstop on page 48 Stops the Data Acquisition (DAQs).
DAQstopMultiple on page 49 Stops multiple channels of Data Acquisition (DAQs).
DAQpause on page 50 Pauses the Data Acquisition (DAQs).
DAQpauseMultiple on page 51 Pauses multiple channels of Data Acquisition (DAQs).
DAQresume on page 52 Resumes acquisition on the selected DAQs.