manualshive.com logo in svg

Keysight LPDDR4, Руководство по установке

Поделиться
Скачать
Keysight LPDDR4 Скачать руководство пользователя страница 26

3

Introduction to W6602A LPDDR4 BGA Interposer

26

Keysight W6600A-series LPDDR4 BGA Interposers Installation Guide

Hardware and Software Requirements

Before you start installing the W6602A interposer, ensure that you have the following list of hardware 

and software components needed for these interposer. 

Hardware Requirements for W6602A

One U4164A Logic Analyzer module (with option -02G) for each LPDDR4 16-bit channel configuration
or
Two U4164A modules (with option -02G) combined via cables to form a module set for a single 32-bit channel configuration

M9502A 2-slot or M9505A 5-slot AXIe chassis to install the U4164A modules

M9537A embedded controller or host PC with PCI express adapter card for the chassis

W6602A LPDDR4 Interposer with 200-ball riser

Two U4207A probe cables to connect the W6602A interposer to Logic Analyzer modules
(Two cables needed for each interposer regardless of the software configuration in which the interposer is used.)

Software Requirements

Licensing

Description

Logic and Protocol Analyzer software version 6.40 or 
higher.
(Required)

Unlicensed base software with 
additional licensing options

Base software platform for configuring and using Keysight’s logic 
analyzer modules.

B4661A Memory Analysis Software Tools Package 
version 6.40 or higher. (Required)

Includes unlicensed as well as 
licensed features

Base software package that includes configuration files and tools 
to help you perform DDR/LPDDR post-process as well as 
real-time protocol compliance violation testing, decode and view 
memory transactions, and set up your logic analyzer for 
DDR/LPDDR data capture and analysis.

The below-mentioned licensed/unlicensed software features from the B4661A software package are required for W6602A.

Default LPDDR configuration files 
(Required)

Available as an unlicensed standard 
feature with the B4661A package. 

Includes default XML configuration files for use with the W6601A 
interposer.

DDR Setup Assistant and DDR Eyefinder software 
version 6.40 or higher.
(Required)

Available as an unlicensed standard 
feature with the B4661A package. 

A wizard- like application to help you set up your U4164A logic 
analyzer properly for use with the W6600A-series interposers.

DDR Custom Configuration Creator Tool version 6.40 
or higher
(Required)

Available as an unlicensed standard 
feature with the B4661A package. 

Allows you to define the footprint layout as per your custom 
probing solution used in the DDR/LPDDR setup and then create 
an XML configuration file based on this footprint information. 

B4661A-2FP LPDDR Bus Decoder software version 
6.40 or higher.
(Recommended)

Available as a licensed feature with 
the B4661A package

Allows you to decode and view transactions, commands, and 
data from a LPDDR1, LPDDR2, LPDDR3 or LPDDR4 SDRAM 
memory bus in your device under test.

B4661A-3FP DDR 2/3/4 Protocol Compliance and 
Analysis toolset version 6.40 or higher.
(Recommended)

Available as a licensed feature with 
the B4661A package

A set of tools to:

•

evaluate and analyze the captured LPDDR data.

•

perform real-time or post process compliance. 

•

set up a trigger on the specified address.

•

graphically profile the distribution of memory accesses.

B4661A-4FP DDR 2/3/4 and ONFi Memory Analysis 
Viewer version 6.40 or higher.
(Recommended)

Available as a licensed feature with 
the B4661A package

A viewer installed and displayed within the Logic and Protocol 
Analyzer GUI to analyze:

•

memory traffic statistics.

•

refresh rate and self-refresh periods.

•

distribution of memory accesses.

•

memory performance measurements.

Содержание LPDDR4

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды