7
Safety and Regulatory Information
Safety and Regulatory Information
For your protection, this product has been tested for conformance to various
national and international regulations and standards. The scope of this
regulatory testing includes electrical and mechanical safety, electromagnetic
emissions, immunity, ESD, acoustics, and hazardous materials.
Where required, certifications are obtained from third party test agencies.
Certification marks appear on the product label. In addition, various regulatory
bodies require information under the headings below.
Please refer to the
Safety Information
guide provided with the instrument rack
for additional important information.
This product and related documentation must be reviewed for familiarization
with safety markings and instructions before operation.
Safety Warnings
The following warnings and cautions are applicable to all Keysight racks. Please
observe all safety precautions and warnings.
Grounding
This product has not been evaluated for connection to an IT power system, an
AC distribution system having no direct connection to earth (ground), according
to EN60950.
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or situation which, if not done correctly or
adhered to, could result in injury. Do not proceed beyond a
WARNING sign until the indicated conditions are fully understood
and met.
The CAUTION sign denotes a hazard. It calls attention to an
operating procedure, practice, or situation which, if not done
correctly or adhered to, could damage or destroy part or the entire
product. Do not proceed beyond a CAUTION sign until the
indicated conditions are fully understood and met.