Keysight E3661B Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 38

Keysight E3661B Скачать руководство пользователя страница 20

20

Keysight Instrument Rack E7950A-1.3m E3661B-1.6m E3662B-2.0

Description

Filler Panels

To ensure adequate cooling in racks using extractor fans, all unused front panel

space must be covered with blank filler panels an the rear door must be closed.
Filler panels are made from 1.57 mm (0.062 in) aluminum formed to give the

thickness of standard 4.7 (0.187 in) distance from the panel mounting flange.

The panels are supplied with EIA/IEC mounting holes and attaching hardware.
The filler panels are designed for use with the rack with EIA/IEC mounting holes

and attaching hardware. They can be ordered in 7 different sizes measured in EIA

units, mm, or in.

Ballast

Ballast is available in 30 lb. kits, and may be required when using slide- mounted

products and/or keyboard/ work surface products. Use the stability work sheets

in the Procedures chapter to determine ballast requirements.

Monitor Mount Kit

An optional monitor mounting kit is available.

Support Rails

Two optional support rail types are available.

VXI Rail

VXI rails are used with Keysight VXI mainframe equipment.

Do not ship racks with ballast installed.

Always mount ballast in the rear of the rack.

The anti-tip assembly is not a substitute for ballast.

«
...
18
19
20
21
22
...
»

Содержание E3661B







































Отзывы:

Нет отзывов