Keysight Instrument Rack E7950A-1.3m E3661B-1.6m E3662B-2.0
29
Procedures
This chapter describes unpacking and repackaging the Keysight rack for
shipment, and common procedures such as positioning racks, removal and
replacement procedures.
Receiving
This section contains information pertaining to unpacking, inspection, and
reshipment.
Make sure that all doors, elevators, and passageways in route to the site are
large enough to accommodate the rack.
The packaged physical specifications for the racks are listed below.
Floor elevators and lifting equipment must be of sufficient capacity.
If the rack package is damaged upon receipt, request that the carrier's agent be
present when the protective covering is removed. Inspect the rack for damage
(scratches, dents, bent pieces, etc.). If the rack is damaged notify the carrier and
the nearest Keysight Technologies Sales and Service office immediately.
Unpacking and Handling
The lifting brackets supplied with the rack are suitable for lifting the rack when
fully loaded.
Use the following procedure to remove the rack from the shipping base. One
person can perform this procedure.
1
Cut the poly strap bands around the shipping container. See Figure 14.
Rack
Height
Wid th
Depth
Weight
E7590A
1.52 m / 60 in
.76 m/ 30 in
1.7 m / 67 in
140.6 kg/310 lbs
E3661B
1.8 m / 72 in
.76 m/ 30 in
1.7 m / 67 in
161 kg/355 lbs
E3662B
2.2 m / 87.5 in
.76 m/ 30 in
1.7 m / 67 in
177 kg/390 lbs
Do not lift an unpackaged rack with a fork lift.
Wear protective glasses while cutting the plastic bands around the
shipping container. These bands are under tension. When cut,
they can spring back and cause serious eye injury.