Keysight DSOX1202A, Руководство пользователя

Страница: 224 / 330

224 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
20
Save/Recall (Setups, Screens, Data)
To recall reference waveform files from a USB storage device
1 Press the [Save/Recall] key.
2 In the Save/Recall menu, press the Recall softkey.
3 In the Recall menu, press the Recall softkey and turn the Entry knob to select
Reference Waveform data (*.h5) .
4 Press the To Ref: softkey and turn the Entry knob to select the desired reference
waveform location.
5 Press the softkey in the second position and use the Entry knob to navigate to
the file to recall. See "To navigate storage locations" on page 221.
6 Press the Press to Recall softkey.
A message indicating whether the recall was successful is displayed.
7 If you would like to clear the display of everything except the reference
waveform, press Clear Display .
Recalling Default Setups
1 Press the [Save/Recall] key.
2 In the Save/Recall menu, press Default/Erase .
3 In the Default menu, press one of these softkeys:
• Default Setup — recalls the oscilloscope's default setup. This is the same as
pressing the front panel [Default Setup] key. See "Recall the Default
Oscilloscope Setup" on page 24.
Some user settings are not changed when recalling the default setup.
• Factory Default — recalls the oscilloscope's factory default settings.
You must confirm the recall because there are no user settings that are left
unchanged.
Performing a Secure Erase
1 Press the [Save/Recall] key.
2 In the Save/Recall menu, press Default/Erase .