Keysight DCA-X Series, Быстрый старт

Страница: 13 / 48

1 Introduction
Accessories
Only Keysight approved accessories shall be used.
Optional Accessories
n
11667B Power splitter, dc to 26.5 GHz, APC 3.5 mm
n
11667C Power splitter, dc to 50 GHz, 2.4 mm
n
54006A 6 GHz Resistive divider probe kit
n
54008B 24 ns delay line
n
N1020A 6 GHz TDR probe kit (passive)
n
N1022A Active Probe Adapter
n
N1024A TDR Calibration Kit
n
N1025A 1 GHz Active Differential Probe
Optional Adapters for Electrical Channel Inputs
n
SMA (f-f) adapter, Keysight part number 1250-1158
n
APC 3.5 (f-f) adapter, Keysight part number 5061-5311
Optional Adapters for Optical Channel Inputs
Table 1 on page 14 shows the available fiber-optic adapters for optical
channels. These adapters connect onto the front-panel optical channel
connectors. FC/PC adapters come pre-installed on new optical modules.
Changing fiber-optic adapters is easy. Simply hand turn an adapter counter-
clockwise to remove it from a channel connector; to install a different adapter,
hand turn the new adapter clockwise onto the connector.
For more information on options and licenses, including the transportable
licenses, refer to the www.keysight.com. If anything is missing or defective,
refer to
Chapter 5 , Contacting Keysight, on page 44 . If the shipment was
damaged, contact the carrier, then contact the nearest Keysight Sales Office.
Keep the shipping materials for the carrier’s inspection. The Keysight Sales
Office will arrange for repair or replacement at Keysight’s option without
waiting for claim settlement.
N1000A Quick Start Guide 13