Keysight 5500, Руководство пользователя

Страница: 113 / 330

Contact Mode Imaging
5
Keysight 5500 SPM User’s Guide 5-7
16
In the Scan Controls section, enter the desired Speed for the scan,
stated in Lines/Second (ln/s). A typical starting value is 1-2 ln/s.
17
Select a resolution from the Points/Lines drop down menu. A good
starting value is 256 , providing ~195 nm/pixel resolution for the 50
micron scan size selected in Figure 5-5 .
The grid in the Scan tab shows the total available range of motion of
the X and Y piezo actuators. The yellow square represents the size
and location of the scan, based on the current scan settings.
18
Change the Size (in microns) to set the scan size in both X and Y.
Enter X Offset and/or Y Offset values to move the scan region. You
can also click and drag the yellow box to move the region. Click the
“
+ ” button to return the offsets to zero.
19
In the Realtime Images window, choose to display Topography,
Deflection and Friction. Click the “ + ” button of the window to add a
buffer. To set what each buffer will display, click the buffer title, then
select the Input Signal from the drop down list ( Figure 5-7 ). The
content of the list will vary depending on the imaging mode.
Figure 5-7 Selecting the Input signals in the Realtime Images window
20
In the Scan Controls section, click the Down blue arrow to initiate a
scan starting at the top of the grid. Click the Up blue arrow to initiate
the scan from the bottom up ( Figure 5-6 ). The image maps will begin
to be displayed in the Realtime Images window.