A
Rack Mounting the Instrument
280
Keysight 53147A/148A/149A Operating and Programming Guide
Rack Mounting the Instrument
You can mount the Keysight 53147A, 53148A, and 53149A in a standard 19-inch
rack using the optional Rack Mounting Kit (53147-67001) available from Keysight:
To rack-mount the instrument, you must first remove the front bumper, the front
bumper retainers, and the carrying handle. Use the following procedure to
prepare the instrument for rack-mounting:
1
Remove the front bumper by lifting the inner edge of the bumper away from
the shroud near one corner at the top and one side and pulling that corner
away from the instrument. Repeat the process with the remaining corners until
the bumper is free of the instrument.
2
Pull out on both sides of the handle at the handle pivots, and rotate the handle
towards the top of the instrument until the handle is touching the top of the
shroud.
3
Use a T15 Torx™ tool to remove the three screws that attach each of the
handle pivots to the sides of the instrument, and remove the handle.
4
Use a #1 Phillips™ screwdriver to remove the two screws that attach each of
the front bumper retainers to the top and bottom of the instrument (there are
four front bumper retainers—two each on the top and bottom).
NOTE
Unlike the hardware used elsewhere in this instrument, all hardware used to
attach the handle pivots and the rack mounts to the instrument
is metric.
OPTIONS
001 Oven Time Base
002 Battery
Main Power
!
!
In or Out
Reference 10 MHz
Auxiliary
AC POWER
90-130 VAC 50/60/400 Hz
190-230 VAC 50/60 Hz
FUSE
1.0 A
250V
WARNING:
To avoid electrical shock:
Do not remove covers.
No user serviceable parts inside.
Refer all servicing to qualified personnel.
RS-
232
GPIB
Counter/ Power Meter/ DVM
This unit must be earth grounded.
Made in U.S.A.
of domestic and foreign content
POWER METER
POWER
GHz
MHz
kHz
Hz
20 GHz Counter/Power Meter/DVM
MODIFY
Reset/
Local
Cal
Factor
Freq
Offset
Menu
On/Off
Enter
Avg
+ / -
Freq
Clear
Resol
Shift
Ch 12
Rel Freq
Offset
Avg On
Rel Pwr
Offset
dB
dBm
Watts
mW
uW
%
Ext Rel
Error
Shift
Hold
Rate Rmt SRQ
Standby
Counter
Power
Meter
DVM
Rate
Pwr
Offset
Display
Power
dBm/W
Store
Cal
Zero
Offset
On/Off
Rel Pwr
DVM
+
–
DAMAGE
±60 VDC
Display
DVM
POWER METER
OUTPUT
Power Ref.
1.00mW 50MHz
INPUT
Do NOT Exceed
Sensor Max Power
COUNTER
Offset
On/Off
Rel Freq
Chan
Select
COUNTER
CHANNEL 1
10 Hz to 125 MHz
DAMAGE
+30 dBm
1M
Ω
COUNTER
CHANNEL 2
50MHz to 26.5 GHz
50
Ω
DAMAGE
+27 dBm
Gate
Содержание 53147A
Страница 1: ...Keysight 53147A 148A 149A Microwave Frequency Counter Power Meter DVM Operating and Programming Guide ...
Страница 20: ...20 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 310: ...312 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...