3
Programming
222
Keysight 53147A/148A/149A Operating and Programming Guide
– If an
<expected_value>
parameter is outside the measurement capabilities of
the instrument model, an error is generated, and the command does not
execute.
– For
:POWer
,
<resolution>
must be defaulted or set to 0.01[dB].
“Descriptions of the Measurement Functions”
description of each of the measurement functions.
<function>
,
<parameters>
, and
<source_list>
for each of the measurement functions.
COMMAND
:CONFigure?
Queries the function configured by the last
:CONFigure
command or
:MEASure
query.
QUERY
RESPONSE
– A string of the form: "
<function> <parameters>[,<source_list>]
."
The leading colon is omitted from the
<function>
.
– The response is unaffected by
*RST
, recall, and
[:SENS]:FUNC
.
COMMENTS
– If the instrument state has changed through commands other than
:CONFigure
or the
:MEASure
query, the instrument does not track these
changes, and the query response does not reflect these changes.
– For
:POWer
,
<resolution>
must be defaulted or set to 0.01[dB].
– If an
<expected_value>
parameter is outside the measurement capabilities of
the instrument model, an error is generated, and the command does not
execute.
“Descriptions of the Measurement Functions”
description of each of the measurement functions.
<function>
,
<parameters>
, and
<source_list>
for each of the measurement functions.
COMMAND
:FETCh?[[:SCALar]:<function>]?
This query returns the measurement taken by the
:INITiate
or
:READ?
command or
the :MEASure query.
QUERY
RESPONSE
If no valid result is available, no result is returned, and error -230 is generated.
Содержание 53147A
Страница 1: ...Keysight 53147A 148A 149A Microwave Frequency Counter Power Meter DVM Operating and Programming Guide ...
Страница 20: ...20 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 310: ...312 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...