Keysight 33210A, Руководство по обслуживанию

Страница: 58 / 131

56
Chapter 4 Calibration Procedures
Recommended Test Equipment
4
Recommended Test Equipment
The test equipment recommended for the performance verification and
adjustment procedures is listed below. If the exact instrument is not
available, substitute calibration standards of equivalent accuracy.
* Q = Quick Verification P = Performance Verification T = Troubleshooting
** An oscilloscope is not required for calibration, only for troubleshooting.
Instrument Requirements Recommended Model Use*
Digital Multimeter
(DMM) ac volts, true rms, ac coupled
accuracy: ±0.02% to 1 MHz
dc volts
accuracy: 50 ppm
resolution: 100
µ
V
Resistance
Offset-compensated
accuracy: ±0.1
Ω
Keysight
3458A Q, P, T
Power Meter 100 kHz to 100 MHz
1
µ
W to 100 mW (–30 dBm to +20 dBm)
accuracy: 0.02 dB
resolution: 0.01 dB
Keysight
E4418B Q, P, T
Power Head 100 kHz to 100 MHz
1
µ
W to 100 mW (–30 dBm to +20 dBm)
Keysight
8482A Q, P, T
Attenuator –20 dB
Keysight
8491A Opt 020 Q, P, T
Frequency Meter accuracy: 0.1 ppm
Keysight
53131A Opt
010 (high stability)
Q, P, T
Oscilloscope** 500 MHz
2 Gs/second
50
Ω
input termination
Keysight
54831B T
Adapter N type (m) to BNC (m) N type (m) to BNC (m) Q, P, T
Cable BNC (m) to dual-banana (f)
Keysight
10110B Q, P, T
Cable (2 required) Dual banana (m) to dual banana (m)
Keysight
11000-60001 Q, P, T
Cable RG58, BNC (m) to dual banana
Keysight
11001-60001 Q, P, T
Cable RG58, BNC (m) to BNC (m)
Keysight
8120-1840 Q, P, T