Keysight 1000 Series, Руководство пользователя

Страница: 107 / 156

Making Measurements
4
Keysight 1000 Series Oscilloscopes User’s Guide 107
Making Cursor Measurements
You can use the [Cursors] front panel key to select between these cursor
measurement modes:
To use manually adjustable cursors
You can set up two parallel, manually adjustable cursors to make amplitude
(vertical) or time (horizontal) measurements on a selected waveform.
1 Press [Cursors] .
2 In the Cursors menu, press Mode .
Manual Gives you manually adjustable, parallel cursors for measuring
time or amplitude between cursors.
Track Gives you one or two manually adjustable, cross-hair cursors
that track the points of a waveform, measuring time and
amplitude.
Auto Gives you automatically adjusted cursors for the most recently
displayed voltage or time measurement.
OFF Cursors are tuned off.
Figure 46 [Cursors] Key
Menu
Zoom
Cursors Measure Acquire Display
Help
Utility
Print
Save
Recall
Default
Setup
Auto-
Scale
Run
Stop
Single
Push Push
Push
for Zoom to Zero
for 50%