1
Keysight ZA0060A Quick Start Guide
35
Getting Started:
Bluetooth
®
5 Signaling Test Plan
1
Launch Keysight TAP and open the
Bluetooth
®
5 Signaling test plan located at
C:\Program Files\Keysight\TAP8\IoTDeviceTest\TapFiles
.
2
Right-click any of the test steps and click
Expand All
to list the pre-configured
test steps.
3
Click a test step at any one time to view their Step Settings located at the left
panel. See the table below for the description and settings of each test step.
4
To set up the Results Listener plug-ins, view step 4 on
5
Once you have created a test plan that suits your testing requirement, turn on
your DUT and place it in the shield box. Click
Run
to start the test plan.
6
Observe the Log panel as it will display a 'Passed' or 'Failed' message when
the test completes.
7
Once the test is complete, you can view the results at the Step Settings tab for
each test step. For those who have set up the 'Simple CSV Listener' plug-ins,
find your results at
C:\Program Files\Keysight\Tap8\Results
and open it in
Microsoft Excel.
NOTE
This measurement suite requires KS83304B license. Contact your local Keysight
representative to purchase your license.
Test Steps and Description
Initialize
Bluetooth
®
5 Radio
This test step is the root test step for
Bluetooth
®
5 signaling test to initialize the
Bluetooth
®
5 radio.
