Keysight Technologies X-Series Скачать руководство пользователя страница 58

Страница: 58 / 398

58 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide

Using IO Interfaces
Using USB

Using USB

USB 2.0 connectors can be used to communicate with the signal generator.

N51xxB EXG/MXG signal generators are equipped with a Type-B rear panel

connector (device USB). Use a Type–A to Mini–USB 5 pin cable to connect the

signal generator to the computer (Refer to

“Setting Up the USB Interface” on

page 59

). Connect the Type–A front panel connector (host USB) can be used

to connect a mouse, a keyboard, or a USB 1.1/2.0 flash drive (USB media).

(Refer to the User’s Guide.) ARB waveform encryption of proprietary

information is supported. Many functions provided by GPIB, including GET,

non–SCPI remote languages, and remote mode are available using the USB

interface.

The following sections contain information on selecting and connecting I/O

libraries and the USB interface that are required to remotely program the signal

generator through the computer and combining those choices with one of

several possible USB interface protocols.

—

“Selecting I/O Libraries for USB” on page 59

—

“Setting Up the USB Interface” on page 59

—

“Verifying USB Functionality” on page 60

USB cables are not industrial graded and potentially allows data loss in

noisy environments.
USB cables do not have a latching mechanism and the cables can be

pulled out of the PC or instrument relatively easily.
The maximum length for USB cables is 30 m, including the use of inline

repeaters.

The USB 2.0 interface supports USBTMC or USBTMC–USB488

specifications.
For more information on connecting instruments to the USB, refer to the

Keysight Connection Expert in the Keysight IO Libraries Help.

For a list of compatible flash drives to use with the USB external interface.

Refer to

http://www.keysight.com/find/mxg

Do not use the front panel USB (Type-A) connector to connect to a

computer.

Содержание X-Series















































































































































































































































































































































































































Результаты поиска

Содержание X-Series

Отзывы:

Похожие инструкции для X-Series

Бренды по названию

Популярные бренды

Keysight Technologies X-Series, Руководство по программированию

Результаты поиска

Содержание X-Series

Отзывы:

Похожие инструкции для X-Series

Бренды по названию

Популярные бренды