Keysight Technologies U4301 Скачать руководство пользователя страница 57

Страница: 57 / 204

Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Setting Up Triggers

Select the

Simple Trigger

option.

Select the

Trigger on Packets or Ordered Sets

Trigger Mode option.

(The

Trigger when Stop button is pressed

Trigger Mode option can be useful, for example, to see

the events that lead up to a stop, halt, etc.)

From the

Global Filter

listbox, select the following options:

From the

Store everything including Logical Idles

field, select whether you want to enable or

disable the storage of all types of ordered sets and packets including the logical idles in

the capture memory.

From the

Store CLKREQ# Transitions

field, select whether you want to enable or disable the

storage of the Reference Clock Request - CLKREQ# signal’s assertion and deassertion in

the capture memory. Enabling this storage allows you to capture and view CLKREQ#

related data exchanged for the L1.1 and L1.2 substates transitions.

iii

If you disable the Store everything including logical idles field, then the

Filter Off/ Store

Everything

drop-down list is activated. From this list, you can select the types of ordered

sets and TLP/DLLP packets that you want to filter out from getting stored in analyzer

memory. The options selected from this list act as the storage qualifiers. The selected

types of ordered sets and packets are acquired but are not qualified to be stored in the

analyzer's memory. If you select the Filter Everything option from this list, then none of

the acquired samples will qualify to be stored in the analyzer memory. As a result,

analyzer will keep running and you need to stop it manually because analyzer keeps

Содержание U4301













































































































































































































Результаты поиска

Содержание U4301

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies U4301, Руководство пользователя

Результаты поиска

Содержание U4301

Отзывы:

Бренды по названию

Популярные бренды