manualshive.com logo in svg

Keysight Technologies U4301, Руководство пользователя

Поделиться
Скачать
Keysight Technologies U4301 Скачать руководство пользователя страница 116

10

Computing and Viewing Decoded Transactions

116

Keysight U4301 PCIe Gen3 Analyzer User’s Guide

Transactions are computed and displayed for the specified data range.

Defining Markers for Setting the Computation Range

If the captured PCie traffic is too large and you want to view decoded transactions from a specific 

portion of this traffic, then you can limit the computation range by defining start and end markers in 

the PCIe traffic. 

To define markers

1 From the upper pane of the Protocol Viewer, right-click the row in the captured PCIe traffic that 

should act as the starting point for transaction decode. 

2 Select 

Place Marker

 from the displayed context menu and then select an existing marker or click 

New Marker

 to define a new marker at this point.

Once markers are defined, these are available for selection in the 

Data Range 

group box of the 

Transaction Decode

 tab. 

NOTE

If you want to compute decoded transactions in background while the U4301 module is 

capturing PCIe data, then select the 

Compute All on Run 

check box in the Protocol Viewer 

and click the 

Run

 toolbar button. This allows you to perform a compute for all the relevant 

tabs in Protocol Viewer automatically after the data capture is complete. It thereby helps you 

perform a faster compute than performing a compute for each tab individually after the data 

is captured. 

NOTE

You need to recompute the decoded transaction results if you want to change:
- the data range for which transactions are to be displayed.
- the storage protocol for which transactions are to be displayed.
- the device setup such as base address, size, or the number of queues.

Содержание U4301













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды