Keysight Technologies U3810A, Руководство по началу работы

Страница: 4 / 134

Keysight U3810 Series Getting Started Guide 4
Safety Consideration
Read the information below before using the instrument.
The following general safety precautions must be observed during all phases of operation, service,
and repair of this instrument. Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards for design, manufacture, and intended use of the
instrument. Keysight Technologies assumes no liability for the customer’s failure to comply with these
requirements.
WARNING
To prevent fire or injury:
−
Use only the designated AC/DC adapter with the instrument.
−
Observe all ratings and markings on the instrument before connecting to the
instrument.
−
When performing measurements, ensure that the right safety and performance ratings
of instrument and accessories are used.
CAUTION
Electrostatic discharge (ESD) can result in damage to the components at the exposed area
of the educational kit. To prevent electrostatic discharge (ESD):
−
Select a static-free work location when installing and removing sensitive component.
− Handle sensitive components to the minimum extent possible with ESD safe practices.
−
Transport and store in ESD preventive bags or containers that protect sensitive
components from static electricity.
CAUTION
−
If the instrument is used in a manner not specified by the manufacturer, the instrument
protection may be impaired.
−
Always use a dry cloth to clean the instrument. Do not use ethyl alcohol or any other
volatile liquid.