U3020AS16
Instrument Settings
Host Name Command
This command assigns a Host Name to the U3020A. The Host Name is the host
portion of the domain name, which is translated into an IP address.
Syntax
:
SYSTem:COMMunicate:LAN:HOSTname "<name>"
SYSTem:COMMunicate:LAN:HOSTname?
If you change the Domain Name, you must cycle power on the U3020A to
activate the new address.
Example
:
The following command defines a Host Name:
SYST:COMM:LAN:HOST "U3020AS16-0101"
The following query returns the Host Name currently being used by the
instrument
(the quotes are also returned):
SYST:COMM:LAN:HOST?
Typical Response: "U3020AS16-0101"
GPIB Address Command
GPIB Address Command Description
This command assigns a GPIB address to the U3020A.
Syntax
:
SYSTem:COMMunicate:GPIB:ADDRess <address>
SYSTem:COMMunicate:GPIB:ADDRess?
If you change the GPIB address, you must cycle power on the U3020A to
activate the new address.
Example
:
The following command sets the GPIB address to 26:
SYST:COMM:GPIB:ADDR 26
The following query returns the current GPIB address:
SYST:COMM:GPIB:ADDR?
Typical Response: 26
Keysight U3020AS16 User's and Service Guide
29
