Keysight Technologies U3020AD01, Руководство пользователя и сервисное руководство

Страница: 7 / 42

U3020AD01 Description
Description
The Keysight U3020AD01 Dynamic Accuracy Test Set is designed for the Keysight PNA-X
network analyzer as a test accessory in performing the power linearity test (dynamic accuracy)
of the network analyzer receivers. As of this manual edition, other Keysight network analyzer
product families have also incorporated the Test Set in their production and service processes.
The U3020AD01 Test Set can only be controlled via the rear panel GPIB or LAN interfaces.
When using the Connection Expert utility program, available on the PNA-X platform and other
computer platforms, the program may identify the Test Set as "L449XA" or "U3020A." The full
Test Set model number can be found on its rear panel serial label.
For more PNA-X network analyzer Dynamic Accuracy measurement information, refer to the
PNA-X Service Guide for the model you have:
http://www.keysight.com/find/pna
Verifying the Shipment
To verify the contents shipped with your product, refer to the “Box Content List” included with
the shipment.
Inspect the shipping container. If the container or packing material is damaged, it should be
kept until the contents of the shipment have been checked mechanically and electrically. If
there is physical damage refer to
“ Contacting Keysight” on page 35 . Keep the damaged
shipping materials (if any) for inspection by the carrier and an Keysight Technologies
representative.
Table 1 U3020AD01 Accessories Supplied
Description
Part Number
RF cable, Flex 3.5 mm M/F, 61 cm (2 ft.) long 8121-2111
Manual, User 's Guide
Quantity
4
1 U3020-90004
Keysight U3020AD01 User's and Service Guide 2