Keysight Technologies SL1200A Series, Руководство по эксплуатации, Страница: 12 / 44

User Information
12/44 Scienlab Regenerative AC Emulator – Keysight SL1200A Series – Operating Instructions
User Information
This Operating Instructions
describes how to transport, install, connect, commission, operate and
maintain the system,
provides important notes on safe and efficient handling of the system.
These Operating Instructions is part of the SL1200A Series Scienlab Re-
generative AC Emulator and should always be kept at the system´s place
of use.
The operating personal must read and understand the Operating Instructions and
all other safety instruction before using this system.
These Operating Instructions must be readily accessible and available operators
and maintenance personnel.
Applicable Documents
The following documents are also part of the system:
Declaration of conformity
User Manual SL1200A Regenerative AC Emulator Soft Front Panel
(SFP)
Getting Started SL1200A Scienlab Regenerative AC Emulator
Acceptance and calibration report
Action Instructions
Steps to be performed by the operating personnel are given as a num-
bered list. The order of the steps must be followed. The systems response
to the relevant steps are indicated by a check mark.
Example:
1
Step 1
2 Step 2
✓
System response to the steps.
Steps with no specific order are given as a bulleted list.
Example:
Point 1
Point 2
Links
Cross-references to other parts of this Operating Instructions or hyperlinks
to websites are shown in
red .
Note for the Operator
If the SL1200A is integrated into an overall test bench with other systems,
the operator should carry out a risk assessment.
NOTICE