Keysight Technologies S9101A Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 98

Keysight Technologies S9101A Скачать руководство пользователя страница 8

2 Review Safety Requirements

2. 2 Safety

The safety information in this section applies to the following products.

Keysight S9101A 5G Multi-Band Vector Transceiver consists of:

PXIe chassis and modules, rugged front panel, and cables

Keysight S9101RH mmWave Transceiver

These products have been designed and tested in accordance with accepted industry
standards and have been supplied in a safe condition. This documentation contains
information and warnings that must be followed by the user to ensure safe operation
and to maintain products in a safe condition.

2. 2. 1 Safety Compliance

These products comply with the essential requirements of the European LVD (Low
Voltage Directive) as well as current editions of the following standards (dates and
editions are cited in the Declaration of Conformity):

IEC/EN 61010-1

Canada: CSA C22.2 No. 61010-1

USA: UL std no. 61010-1

2. 2. 2 Acoustic Statement (European Machinery Directive)

Acoustic noise emission
LpA <70 dB
Operator position
Normal operation mode per ISO 7779

4

S9101A 5G Multi-Band Vector Transceiver, Startup Guide

«
...
6
7
8
9
10
...
»

Содержание S9101A



































































































Отзывы:

Нет отзывов