Keysight Technologies S9101A, Руководство для стартапов, Страница: 40 / 98

4 Install Hardware
4. 4 Keysight S9101A-TR2
5G Multi-Band Vector Transceiver
Connect the hardware as described in the following table.
Item Qty Connection To... From...
2 S9100-60005 Three-Cable Bundle (Color-Coded)
Red SMA (m) to TNC (m), 4000 mm (157.5 in)
Connect S9101RH LO/Pwr/Ctrl IF In
to S9101A LO/Pwr/Ctrl Out.
Black SMA (m) to Type-N (m), 4000 mm (157.5 in)
Connect S9101RH IF In to S9101A IF Out.
White SMA (m) to Type-N (m), 4000 mm (157.5 in)
Connect S9101RH IF In/Out to S9101A IF In.
1 8121-3222 loop-back cable,
2.4 mm (m) to 2.4 mm (m), 152.4 mm (6.0 in),
Accessory Cable
*
: Used to connect from RF Tx/Rx 1 to RF Tx/Rx 2
on each S9101RH mmWave Transceiver (one at a time).
*
This cable is used when verifying operation with software at mmWave frequencies, for example 28 GHz.
Disconnect this cable during normal operation. Only one loop-back cable is included with each S9101A-TR2;
move this loop-back cable between each S9101RH mmWave Transceiver when verifying operation.
36 S9101A 5G Multi-Band Vector Transceiver, Startup Guide