Keysight Technologies S9101A, Руководство для стартапов, Страница: 25 / 98

3 Review Hardware Components
S9101A 5G Multi-Band Vector Transceiver, Startup Guide 21
3. 2 Connector Descriptions
3. 2. 1 Connectors, 100 MHz Ref Out & 10 MHz Ref In/Out above the
Rugged Front Panel
100 MHz Ref Out, Frequency Reference
(Connects behind rugged panel from M9300A PXIe Reference 100 MHz Out.)
Connector BNC (f)
Amplitude 9.5 dBm, nominal
10 MHz Ref Out
(Connects behind rugged panel from M9300A PXIe Reference 10 MHz Out.)
Connector BNC (f)
Amplitude 9.5 dBm, nominal
10 MHz Ref In
(Connects behind rugged panel to M9300A PXIe Reference Ref In
and locks to another reference with a value from 1 to 110 MHz.)
Connector BNC (f)
Frequency 1 MHz to 110 MHz, sine wave
Lock range ± 1 ppm, nominal
Amplitude 0 to 10 dBm, nominal
3. 2. 2 Connectors, Trig 1 and Trig 2 on the Rugged Front Panel
Trig 1 and Trig 2
(Connects behind rugged panel to M9019A PXIe Chassis Trig 1 and Trig 2.)
Connector BNC (f)
Direction control Input or output (configurable)
Output level 3.3 V CMOS (TTL compatible, 5 V tolerant)
Output impedance 50 Ω (typ)
Output trigger source PXI_Trig0 - PXI_Trig7 (Segment 2 or 3)
Input level 3.3 V CMOS (TTL compatible, 5 V tolerant)
Input impedance 3 kΩ (typ)
Input trigger
destination PXI_Trig0 - PXI_Trig7 (Segment 2 or 3)
Input threshold 1.65 V (typ)
Minimum swing 250 mV (typ)
Minimum pulse width 100 ns (typ)
These two front panel trigger connectors (Trig 1 and Trig 2)
connect to the PXI [0:7] backplane trigger bus in the M9019A
chassis and can be configured as Input or Output. To learn more
about these connectors, see the
Keysight PXIe Chassis Family ,
User Guide (M9019-90003).