THANK YOU
N99 x x A /B FieldFox Handheld Analy zer
Quick Star t Guide
Congratulations, with this instrument you will achieve fast, accurate results with confidence.
IMPORTANT!
FULLY charge the FieldFox battery before using the FieldFox for the first time (i.e, The battery will
be fully charged in about 4 hours).
When setting FieldFox on a surface, it is recommended to operate it with the kickstand open. The
cooling is less effective when FieldFox is placed lying down flat on the instrument’s back.
keysight.com
Find a Manual • Register Your Instrument
Browse Application Notes
Request Repair or Calibration
View Discussion Forums • Updates
-
Learn more or for questions: Download the
N9927-90001 or N9938-90003 User’s Guide
.
-
See also,
www.keysight.com/find/fieldfox
.
Keysight.com
2.
Insert the supplied AC/DC adapter (15-19 VDC) into the power connector and
into an electrical outlet (AC/DC adapter is not shown).
- N9912A and N9923A models: The power connector is located on the right side,
under the middle hinged door.
- All other models: The power connector is located on the LEFT side, under the
bottom hinged cover.
Step 1
1.
Install the battery pack into the FieldFox
battery compartment. The battery door is
located on the lower-right side of the FieldFox
(i.e., Press and slide the door down to open).
For more, see Step 3.
Step 2
Battery door
Kickstand
LED
Power button
Power connector
Audio jack
DC VoltageSource
Step 3
3.
Extend the
kickstand and
press the power
button.
