Keysight Technologies N9321C, Руководство пользователя

Страница: 105 / 220

97
Functions and Measurements
Files Operation
Files Operation
The analyzer will store and retrieve data files similar to using a PC.
The analyzer allows you to view and save files in the internal
storage of the analyzer or to a USB storage device. This section
provides information on how to locate catalogs (file types) and to
save files.
Locating and Viewing Files in the Catalog
The analyzer has four types of files:
State records the current controls and settings of the analyzer. Use this
file type for saving test parameters for future recall, such as
frequency and BW settings. (file extension: .STA).
Trace stores trace information (file extension: .TRA).
Setup records the system setting information, such as language,
date/time, and power saving mode. This file type is not used for
test parameter setup information. (file extension: .SET).
Screen stores screen captures of the display (file extension: .JPG).
Limits which stores data sets to determine whether a trace has exceeded
preset specifications (file extension: .LIM)
CSV records the trace data and available for review on PC.
(file extension: .CSV)
Task Planner contains the user-defined measurement tasks in sequence which
make the test task easier in field test.
(file extension: .TPF).
Correction The amplitude correction file is used for trace amplitude offset
compensation. Please refer to
"Corrections" on page 106
to edit
and save the correction file on BSA PC software.
(file extension: .TPF).
Standard contains the frequency range and corresponding parameters for a
specific communication standard. It allows you to recall those
default settings for the singal searching and testing in that range.
(file extension: .STD).