Keysight Technologies N8262A P Series Скачать руководство пользователя страница 4

Страница: 4 / 147

Keysight N8262A User’s Guide

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by the Buyer, Buyer-supplied products or interfacing,

unauthorized modification or misuse, operation outside of the environmental

specifications for the product, or improper site preparation or maintenance.
The design and implementation of any circuit on this product is the sole

responsibility of the Buyer. Keysight does not warrant the Buyer’s circuitry or

malfunctions of Keysight products that result from the Buyer’s circuitry. In

addition, Keysight does not warrant any damage that occurs as a result of the

Buyer’s circuit or any defects that result from Buyer-supplied products.
To the extent allowed by local law, Keysight makes no other warranty, expressed

or implied, whether written or oral with respect to this product and specifically

disclaims any implied warranty or condition of merchantability, fitness for a

particular purpose or satisfactory quality.

Exclusive Remedies

To the extent allowed by local law, the remedies provided herein are the Buyer’s

sole and exclusive remedies. Keysight shall not be liable for any direct, indirect,

special, incidental, or consequential damages (including lost profit or data),

whether based on warranty, contract, tort, or any other legal theory.

Содержание N8262A P Series




















































































































































Результаты поиска

Содержание N8262A P Series

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies N8262A P Series, Руководство пользователя

Результаты поиска

Содержание N8262A P Series

Отзывы:

Бренды по названию

Популярные бренды