Keysight Technologies N8262A P Series, Руководство пользователя

Страница: 111 / 147

Using P-Series Power Sensor 3
Keysight N8262A User’s Guide 111
Step 1. Connecting the power sensor
When you initially connect a P-Series Wideband Power Sensor to the power
meter, the sensor’s calibration data is automatically read by the power meter.
After the sensor’s data is read, the power meter automatically performs a zero and
calibration, see “Zeroing and Calibrating the P-Series Sensor” on page 92 for
further information.
Connect the sensor to the power source.
Step 2. Setting the channel frequency
1 Click . Click to select the channel you want to configure. The
Channel Setup screen is displayed.
2 Use the , , , and softkeys to highlight the frequency field.
3 Click to configure the setting. See “Setting the Measurement
Frequency” on page 34 for further information.
Figure 3-1 P-Series sensor default channel setup
When you have completed the procedure you can return to this menu later to add
more accuracy to the measurement.
Channel