Keysight Technologies N69100 Series, Руководство по эксплуатации и обслуживанию

Страница: 91 / 260

mDNS Service Name
The mDNS service name is registered with the selected naming service. To configure the mDNS
service name of the instrument:
Front Panel Menu Reference SCPI Command
Select System\IO\LAN\Modify\mDNS
You can enter any value from the numeric keypad. For additional
characters, use the up/down navigation keys to enter an alpha
character by scrolling through the selection list that appears when
you press the keys. Use the left/right navigation keys to traverse
the text field. Use the backspace key to delete a value. Press Enter
when you are finished.
Not available
l
mDNS Service Name - This field registers the service name with the selected naming service. If
the field is left blank, no name is registered. A service name may contain upper and lower case let-
ters, numbers and dashes(-).
l
Each instrument is shipped with a default service name with the format: Keysight-modelnumber-
description-serialnumber, where modelnumber is the unit’s 7-character model number, descrip-
tion is the description, and serialnumber is the 10-character serial number located on the label on
the top of the unit (e.g. MY12345678).
Services
This selects the LAN services to enable or disable.
Front Panel Menu Reference SCPI Command
Select System\IO\LAN\Modify\Services
Check or uncheck the services that you wish to enable or disable.
Not available
l
The configurable services include: VXI-11, Telnet, Web control, Sockets, mDNS, and HiSLIP.
l
You must enable Web control if you wish to remotely control your instrument using its built-in Web
interface.
Using the Web Interface
Your instrument has a built-in Web interface that lets you control it directly from the Web browser on
your computer. With the Web interface, you can access the front panel control functions including the
LAN configuration parameters. Up to six simultaneous connections are allowed. With additional
connections, performance will be reduced.
The built-in Web interface only operates over the LAN. A Web browser is required to
use the Web Interface.
The Web interface is enabled when shipped. To launch the Web interface:
Keysight N69100 Series Operating and Service Guide 91
3 Getting Started