Keysight Technologies N69100 Series, Руководство по эксплуатации и обслуживанию

Страница: 156 / 260

CALibrate Subsystem
Calibrate commands calibrate the instrument.
Read the calibration section before calibrating. Improper calibration reduces
accuracy and reliability.
CALibrate:COUNt?
Returns the number of times the unit has been calibrated. The count is incremented whenever the
calibration (and date) is saved, the administration password is changed or reset, or the firmware is
updated.
Parameter Typical Return
(none) <count>
Return the calibration count: CAL:COUN?
CALibrate:CURRent[:LEVel] < value >
Calibrates the current programming and measurement. The value selects the range to calibrate.
Parameter Typical Return
The maximum current of the output range. (none)
Calibrates the current of the 10 A range: CAL:CURR 10
CALibrate:DATA < value >
Enters the calibration value read by the external meter. You must first select a calibration level for the
value being entered. Data values are expressed in base units - either volts or amperes, depending on
which function is being calibrated.
Parameter Typical Return
Numeric value (none)
Specify calibration value 0.0237: CAL:DATA 2.37E-2
CALibrate:DATE < "date" >
CALibrate:DATE?
Enters the calibration date in nonvolatile memory. Enter any ASCII string up to 15 characters. The
query returns the date.
5 SCPI Programming Reference
156 Keysight N69100 Series Operating and Service Guide