Keysight Technologies N5224BU-601, Установочная инструкция

Страница: 8 / 44

8 Installation Note N5225-90117
Description of the Upgrade
Items Included in the Upgrade Kit
-
Items Included in the Upgrade Kit
Check the contents of your kit against the following list. If any part is missing or
damaged, contact Keysight Technologies. Refer to “Getting Assistance from
Keysight” on page 4 .
Table 1 Contents of Upgrade Kit N5225-60117
Ref
Desig.
Description Qty Part Number
- Installation note (this document) 1 N5225-90117
- Software Entitlement Certificate 1 5964-5145
A10 26.5 GHz source (2) board 1 5087-7342
A12 40 GHz doubler assembly port 3
2 5087-7349
A13 40 GHz doubler assembly port 4
A17 13.5 GHz (source 2) synthesizer board 1 N5240-60074
A26 Splitter 1 5067-4086
A28 Mixer brick (2) 1 5087-7323
A30 Test port 3 receiver coupler
2 5087-7760
A31 Test port 4 receiver coupler
A34 Test port 3 coupler 2 5087-7793
A35 Test port 4 coupler
- Machine screw, M3.0 x 6, flat head (to attach front frame to coupler plate) 2 0515-1946
- Machine screw, M2.0 x 6, flat head (8 to attach two receiver couplers to brackets) 8 0515-1602
-
Machine screw, M2.5 x 20, pan head (4 to attach A34 and A35 receiver coupler
assemblies to test set deck)
4 0515-0374
-
Machine screw, M4.0 x 10, pan head (2 each to attach the following boards to the
analyzer chassis: A17 13.5 GHz synthesizer board, A10 26.5 GHz source board, A12
40 GHz doubler assembly port 3, and A13 40 GHz doubler assembly port 4.)
7 0515-0380
- Machine screw, M3.0 x 12, pan head (1 to attach cable bracket to test set deck. 2 0515-0664
-
Machine screw, M3.0 x 8, pan head (3 to attach shield to A28 mixer brick; 8 to attach
two src attn and two rcvr attn to brackets)
4 0515-0372
- Machine screw, M2.5 x 16, pan head (2 to attach splitter to mixer brick) 2 0515-2007
- Machine screw, M3.0 x 25, pan head (3 to attach A28 mixer brick to block) 2 0515-0667
- Machine screw, M3.0 x 20, flat head (2 to attach bracket to A10 26.5 GHz source) 2 0515-2078
- Machine screw, M3.0 x 18, pan head (1 to attach bracket to A10 26.5 GHz source) 1 0515-0666
- Test set front plate, 4-port 1 N5224-00005