Installation Note N5225-90117 13
Description of the Upgrade
Installation Procedure for the Upgrade
“Step 23. Reinstall the A23 Test Set Motherboard.”
“Step 24. Install Cable on the A23 Test Set Motherboard.”
“Step 25. Replace the Front Panel’s Lower Dress Panel.”
“Step 26. Reinstall Front Panel Assembly.”
“Step 27. Install the Overlay.”
“Step 28. Install the Front Panel Jumper Cables.”
“Step 29. Position the Cables and Wires to Prevent Pinching.”
“Step 30. Reinstall the Inner Cover.”
“Step 31. Reinstall the Outer Cover.”
“Step 32. Remove Option 201 License.”
“Step 33. Enable Options 401.”
“Step 34. Verify the PNA Analyzer Program is Running with the Correct
Options.”
“Step 35. Perform Post-Upgrade Adjustments and Calibration.”
“Step 36. Prepare the PNA for the User.”
Step 1.Obtain a Keyword and Verify the Information
Follow the instructions on the Software Entitlement Certificate supplied to
obtain a license key for installation of this upgrade. Refer to
.
Verify that the model number, serial number, and option number information
on the license key match those of the instrument on which this upgrade will be
installed.
If the model number, serial number, or option number do not match those on
your license key, you will not be able to install the option. If this is the case,
contact Keysight for assistance before beginning the installation of this
upgrade. Refer to
“Contacting Keysight” on page 4
Once the license key file has been received and the information verified, you
can proceed with the installation at step 2.
Step 2. Remove the Outer Cover
For instructions, click the Chapter 7 bookmark “Removing the Covers” in the
PDF Service Guide
1
.
If the model number, serial number, or option number do not match those
on your license key file, you will not be able to install the option. If this is
the case, contact Keysight for assistance before beginning the installation
of this upgrade. Refer to
Содержание N5224BU-601
Страница 43: ...Installation Note Xxxxx xxxxx 3...
