manualshive.com logo in svg

Keysight Technologies N5221BU-665, Руководство пользователя, Страница: 17 / 84

Поделиться
Скачать
Keysight Technologies N5221BU-665 Скачать руководство пользователя страница 17

Installation Note N5222-90128                                                                                                                                  17

Installation Procedure for the Upgrade

“Step 45. Install the Front Panel Jumper Cables.”
“Step 46. DC Continuity Test the LFE Board and Test Ports.”
“Step 47. Position the Cables and Wires to Prevent Pinching.”
“Step 48. Reinstall the Inner Cover.”
“Step 49. Reinstall the Outer Cover.”
“Step 50. Remove Option 205 License.”
“Step 51. Enable Option 405.”
“Step 52. Verify the PNA Analyzer Program is Running with the Correct 

Options.”
“Step 53. Perform Post-Upgrade Adjustments and Calibration.”
“Step 54. Prepare the PNA for the User.”

Step 1. Obtain a Keyword and Verify the Information

Follow the instructions on the Software Entitlement Certificate supplied to 

obtain a license key file for installation of this upgrade. Refer to 

“License Key 

Redemption” on page 6

.

Verify that the model number, serial number, and option number information 

on the license key match those of the instrument on which this upgrade will be 

installed.
If the model number, serial number, or option number do not match those on 

your license key, you will not be able to install the option. If this is the case, 

contact Keysight for assistance before beginning the installation of this 

upgrade. Refer to 

“Contacting Keysight” on page 4

.

Once the license key file has been received and the information verified, you 

can proceed with the installation at step 2.

Step 2. Remove the Outer Cover

For instructions, click the Chapter 7 bookmark “Removing the Covers” in the 

PDF Service Guide.

If the model number, serial number, or option number do not match those 

on your license key file, you will not be able to install the option. If this is 

the case, contact Keysight for assistance before beginning the installation 

of this upgrade. Refer to 

“Contacting Keysight” on page 4

.

Содержание N5221BU-665





















































































Отзывы:

Нет отзывов