Keysight Technologies N5221B Скачать руководство пользователя страница 17

Страница: 17 / 88

Installation Note N5222-90131 17

Description of the Upgrade
Installation Procedure for the Upgrade

“Step 47. Position the Cables and Wires to Prevent Pinching.”
“Step 48. Reinstall the Inner Cover.”
“Step 49. Reinstall the Outer Cover.”
“Step 50. Remove Option 220 License.”
“Step 51. Enable Option 420.”
“Step 52. Verify the PNA Analyzer Program is Running with the Correct

Options.”
“Step 53. Perform Post-Upgrade Adjustments and Calibration.”
“Step 54. Prepare the PNA for the User.”

Step 1. Obtain a Keyword and Verify the Information

Follow the instructions on the Software Entitlement Certificate supplied to

obtain a license key file for installation of this upgrade. Refer to

“License Key

Redemption” on page 6

Verify that the model number, serial number, and option number information

on the license key match those of the instrument on which this upgrade will be

installed.
If the model number, serial number, or option number do not match those on

your license key, you will not be able to install the option. If this is the case,

contact Keysight for assistance before beginning the installation of this

upgrade. Refer to

“Contacting Keysight” on page 4

Once the license key file has been received and the information verified, you

can proceed with the installation at step 2.

If the model number, serial number, or option number do not match those

on your license key file, you will not be able to install the option. If this is

the case, contact Keysight for assistance before beginning the installation

of this upgrade. Refer to

“Contacting Keysight” on page 4

Содержание N5221B

























































































Результаты поиска

Содержание N5221B

Отзывы:

Похожие инструкции для N5221B

Бренды по названию

Популярные бренды

Keysight Technologies N5221B, Руководство пользователя

Результаты поиска

Содержание N5221B

Отзывы:

Похожие инструкции для N5221B

Бренды по названию

Популярные бренды