Keysight Technologies N432A, Руководство пользователя

Страница: 77 / 154

Operating Information 2
N432A User’s Guide 55
Figure 2-19 Minimum limit pop-up
Figure 2-20 Meter minimum pop-up
6 If the current unit is dBm or dB, use the numeric keys to enter the
required value and press or . If the current unit is % or W, use
the numeric keys to enter the required value and press or , ,
respectively. You can modify the unit multiplier by pressing ,
followed by or . Press the
corresponding unit multiplier softkey above to enter
your selection.
7 Now, use the right arrow key to highlight the Max Power value field.
8 Press to display the Maximum Limit pop- up (if the current unit is
dBm or dB) or the Meter Maximum pop- up (if the current unit is W or
%).
9 Repeat Step 6 and press to exit the measurement setup screen.
dBm dB
% mW
μ
W
nW 1 of 2
Increment Multiplier Decrement Multiplier
Increment Multiplier
N O T E
The Limits setting can be disabled and re-enabled by selecting the Limits setting field.