Keysight Technologies M8131A, Руководство пользователя

Страница: 131 / 158

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide 131
Remote Programming 4
Time Base Commands
The TIMebase subsystem commands control the reference clock source of
the digitizer.
:TIMebase:REFClock
Command
:TIMebase:REFClock{INTernal | E010 | E100}
Description The command selects the reference clock source.
INTernal
Internal 10 MHz reference oscillator (default)
E010
External 10 MHz reference
E100
External 100 MHz reference
The following errors are detected, when an external reference clock source
is selected:
• Amplitude of external reference signal too small.
• Amplitude of external reference signal too big.
• Frequency of external reference signal out-of-range.
These errors are reported in the STATus subsystem. After selecting a new
reference clock source, the status should be queried. In all these error
cases the external reference signal is not usable and the module
automatically selects the internal reference oscillator.
Query
:TIMebase:REFClock?
The query returns the currently selected reference clock source.
Returned Format
[:TIMebase:REFClock] {INTernal | E010 | E100}<NL>