Keysight Technologies M1749B Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 43

Keysight Technologies M1749B Скачать руководство пользователя страница 20

20 Getting Started Guide

Quick Start
Initial Inspection

Initial Inspection

Inspect the shipping container and the cushioning material for signs of stress.

Retain undamaged shipping materials for future use, as you may wish to ship

the test set to another location or to Keysight Technologies for service. Verify

the contents of the container against the table below.

Shipping Problems?

If the shipping materials are damaged or the contents of the container are

incomplete:

— Contact the nearest Keysight Technologies office.
— Keep the shipping materials for the carrier’s inspection.
— If you must return a test set to Keysight Technologies, use the undamaged

original or comparable shipping materials. See

“Returning the M1749B for

Service” on page 41

.

Item

Deliverable

Description

Getting Started Guide (this

document)

Provides first-time power on

instructions, licensing

information, operating system

information, and general

hardware information.

Keysight M1749B mmWave

Transceiver

AC/DC power converter

Part# 0950-6166

Provides DC power input (19 V) to

instrument-facing panel of

M1749B.

AC power cable

(Cord type varies by country.)

«
...
18
19
20
21
22
...
»

Содержание M1749B












































Отзывы:

Нет отзывов