Keysight Technologies E7515B UXM 5G Скачать руководство пользователя страница 94

Страница: 94 / 109

94 Getting Started Guide

Test Platform Operating System
System Maintenance

Hard Drive Partitioning and Use

The drive is partitioned into 3 sections: C:, D: and E:

— The

partition contains the Windows 10 operating system and software

installed by Keysight. This is an Open System which means you can install

additional software. However it is recommended that you use an external

PC to host all additional software applications that you wish to use in

conjunction with the UXM 5G. The installation and/or use of other software

is not warranted and could interfere with the operation of the test platform

software. If instrument repair is ever needed, the Keysight version of the C:

drive is the only part of the instrument software that is restored by the

Instrument Image Recovery System. You must reload any other software

that you have added in the instrument.

— The

partition is reserved for data storage. This is for the convenience of

backing-up the test platform measurement data. You should always

back-up the data on the D: drive to an external device. This enables you to

restore the data should the hard drive need to be replaced.e

— The

partition is reserved for Keysight’s use. The primary use of the E:

drive is for storing the Calibration and Alignment data, the configuration

files for the Platform Boards and Host PC. Do not change or overwrite the

files on this drive. This could cause your instrument to not meet

specifications, or even to stop functioning correctly. Do not use this drive

for data storage. It is also recommended that you back-up the contents of

this drive by using an external device.

It is recommended that you use an external PC to host software applications you

wish to use in conjunction with the UXM 5G. Installing applications on the

instrument Host PC may result in a compromised performance of the UXM 5G

including decreased throughput and/or measurement performance.

Data on the desktop will be deleted during system recovery. Therefore it is

recommended that you always store your data in another folder on the D: drive,

for example

D:\MyData

Содержание E7515B UXM 5G














































































































Результаты поиска

Содержание E7515B UXM 5G

Отзывы:

Похожие инструкции для E7515B UXM 5G

Бренды по названию

Популярные бренды

Keysight Technologies E7515B UXM 5G, Руководство по началу работы

Результаты поиска

Содержание E7515B UXM 5G

Отзывы:

Похожие инструкции для E7515B UXM 5G

Бренды по названию

Популярные бренды