Getting Started Guide 59
Internal Applications Server
Software Application Location Recommendations
Software Application Location Recommendations
After you have installed this component in the UXM, you need to determine
which applications you wish to run on the Internal Applications Server. Below is
the table of some software applications available for the UXM and upon which
PC they are recommended to be installed and executed for optimal use of the
UXM.
When referencing the table below, note these clarifications:
— The UXM software version number is shown in the appropriate column,
denoting the appropriate location for the software to be executed.
— "Not recommended": location should work, but there is no guarantee
provided of its reliability or of technical support.
— The UXM Embedded (Host) PC is not intended for customer use.
Application
UXM Embedded
(Host) PC
Internal
Applications Server
(SPC)
External PC
Notes
E7630A-MTP:
Message Editor
Software
≥
1.2.1.x
≥
1.2.3.x
≥
1.2.1.x
This application has
low CPU & network
loads. Typically used
when UE is not
connected.
E7515A-L01:
Protocol Logging and
Analysis Software
Do not locate on
Host PC.
≥
1.2.3.x
(Load here only if
application is NOT
also serving data
from this PC)
≥
1.2.1.x
(Load here only if
application is NOT
also serving data
from this PC)
E6966B: IMS-SIP
Server – Registration
only
≥
1.2.1.x
≥
1.2.3.x
This application is
handled
automatically by the
UXM. No customer
action is required.
E6966B:
IMS-SIP Server
Not recommended
≥
1.2.3.x
≥
1.2.1.x
E6966B:
IMS-SIP Client
Not recommended
≥
1.2.3.x
≥
1.2.1.x
E6966B:
IMS-SIP Client
Not recommended
≥
1.2.3.x
≥
1.2.1.x
E6966B:
IMS-SIP Conference
Server
Do not locate on
Host PC.
≥
1.2.3.x
≥
1.2.1.x
