Keysight Technologies E5053A, Руководство пользователя

Страница: 19 / 37

Keysight E5053A Microwave Downconverter 19
Installation
Power supply and fuse
Checking and connecting the power cable
The power cable that comes with the E5053A has a three-wire structure and
one of them is the grounding wire. This power cable grounds the E5053A
through an outlet, protecting the operator from shock hazards.
Step 1. Check the power cable you use for damage.
Step 2. Connect the attached power cable between the power cable receptacle on
the rear panel of the E5053A (see
Figure 1-5 on page 18 ) and a three-pole
outlet whose grounding terminal is grounded securely.
For power cable options, refer to http://www.keysight.com/find/powercords .
Never use a power cable that may be damaged. You may get an electrical
shock.
Securely ground the E5053A with the attached 3-wire power cable with
the grounding wire.