Keysight Technologies CX3300 Series Скачать руководство пользователя страница 108

Страница: 108 / 114

108

Keysight CX3300 User’s Guide, Edition 5

Safety Information

Product Stewardship

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

This product complies with the WEEE Directive (2002/96/EC) marking

requirements. The affixed label indicates that you must not discard this electrical/

electronic product in domestic household waste.
Product Category: With reference to the equipment types in the WEEE directive

Annex 1, this product is classified as a “Monitoring and Control instrumentation”

product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local Keysight office or visit the

following website for more information.

http://about.keysight.com/en/companyinfo/environment/

Perchlorate Information

Perchlorate Material - special handling may apply. Visit the following website.

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Equipment's real-time clock battery or coin cell battery may contain perchlorate

and may require special handling when recycled or disposed of in California.

Содержание CX3300 Series



















































































































Результаты поиска

Содержание CX3300 Series

Отзывы:

Keysight Technologies CX3300 Series, Руководство пользователя, Страница: 108 / 114

Результаты поиска

Содержание CX3300 Series

Отзывы: