Keysight Technologies B2900 Series, Руководство пользователя

Страница: 139 / 234

Keysight B2900 User’s Guide, Edition 5 4-39
Front Panel Reference
Trigger key group
Trigger Output Trigger output, ON or OFF
Trigger output terminal, an internal bus (INT1, INT2), LAN
port (LAN), or a digital I/O pin EXT
n ( n =1 to 14)
If this parameter is ON, B2900 sends an output trigger when it
changes the trigger state for the action specified by the Ch,
Layer, and Action parameters. See
Figure 6-8 on page 6-28 .
For using a digital I/O pin, it is necessary to set function of the
pin, output trigger polarity, type, pulse width, and so on. See
“DIO Configuration dialog box” on page 4-48 and “Using
Digital I/O” on page 3-34 .
Table 4-8 Trigger Source
Trigger Source Description
AUTO Trigger source best suited for the present operating mode is
automatically selected by the internal algorithms.
BUS Remote interface trigger command such as GET, TRIGger,
and *TRG
TIMER Signal internally generated every interval set by the Period
field
INT1 or INT2 Signal from the internal bus 1 or 2
LAN LXI trigger specified by the
:ARM[:ACQ|:TRAN]:SOUR:LAN and
:TRIG[:ACQ|:TRAN]:SOUR:LAN commands
EXT n Signal from the DIO pin n , which is an I/O port of the Digital
I/O D-sub connector on the rear panel. n =1 to 14