Keysight Technologies B1507A, Руководство пользователя

Страница: 150 / 190

4- 42 Keysight B1507A User’s Guide, Edition 1
GUI Reference
I/V Measurement Software
Gate/Base drive
settings
Set the output voltage/current to the gate/base terminal. One of the following types
is automatically selected depending on the selected characteristics measurement.
The selected type is displayed on the title of this terminal setting area as shown in
the following figure.
For the setting items of the types, see below.
• “Bias” on page 4-43

Outputs the constant bias voltage/current.
• “Pulse Bias” on page 4-43

Outputs the voltage or current pulse that the peak output is constant.
• “Step” on page 4-44

Outputs the constant voltage/current that the level is changed every time a sweep
measurement is finished.
• “Pulse Step” on page 4-45

Outputs the voltage/current pulse that the peak level is changed every time a
sweep measurement is finished.
• “Staircase Sweep” on page 4-47

Outputs the staircase-swept voltage/current.
• “Pulse Sweep” on page 4-48

Outputs the staircase-swept pulse voltage/current.
Drain/Collector
drive settings
Set the output voltage/current to the drain/collector terminal. One of the following
types is automatically selected depending on the selected characteristics
measurement. The selected type is displayed on the title of this terminal setting area.
For the setting items of the types, see below.
• “Bias” on page 4-43

Outputs the constant bias voltage/current.