Keysight Technologies AC6800 Series, Руководство по эксплуатации и обслуживанию, Страница: 48 / 198

Using the Web Interface
Your instrument has a built-in Web interface that lets you control it directly from the Web browser on your
computer. With the Web interface, you can access the front panel control functions including the LAN
configuration parameters. Up to six simultaneous connections are allowed. With additional connections,
performance will be reduced.
The built-in Web interface only operates over the LAN. It requires Internet Explorer 7, Firefox, or
Chrome. You also need the Java (Sun) Plug-in. This is included in the Java Runtime Environment.
The Web interface is enabled when shipped. To launch the Web interface:
1.
Open your computer's Web browser.
2. Enter the instrument’s host name or IP address into the browser’s Address field. The following welcome page
will appear.
3.
Click on the Browser Web Control tab in the navigation bar on the left to begin controlling your instrument.
Should network communication issues occur, the instrument settings shown in the Browser Web Control page may
not represent the actual state of the instrument. This may result in unexpected hazardous voltages on the output and
sense connections that could result in personal injury, death, or damage to a device under test. Before touching the
output or sense connections or connecting to a device under test, always verify the state of the instrument.
46 Keysight AC6800 Series Operating and Service Guide