Keysight Technologies 855**A Series, Руководство пользователя и сервисное руководство, Страница: 21 / 52

User’s Guide 85523-90005 1-15
855xxA/B Series CalPods and 85523B CalPod Controller Usage Information
Step 7. Configure the CalPods
7.1 Connect each CalPod to the CalPod controller, as shown in the following graphic.
Press CAL > [More] > [Calpod] > [Calpod]
Method 2: Using the mouse and the PNA pull-down menus.
Click Response > Cal > Calpod > Calpod
If a “Windows Security Alert” appears that is related to the etrak Api, select
“Unblock.”
7.4 Select CalPod Setup on the Calibration Refresh Module Configuration window.
7.5 If using thermal CalPods, the serial numbers will automatically appear in the CalPod Setup dialog
window. However, if using standard CalPods, enter a CalPod serial number, omitting preceding
letters, the click Add CalPod.
For CalPod drive cables, see “Step 1. Inspect the Shipment” on page 1-3 .
7.2 If not already active, start the PNA application.
7.3 Start the CalPod dialog window titled 'Calibration Refresh Module Configuration" using
either method below.
Method 1: Using the PNA front panel HARDKEYS and [softkeys].