Keysight Technologies 85058V, Руководство пользователя и сервисное руководство

Страница: 8 / 58

1- 2 85058V
General Information
Verification Kit Overview
Verification Kit Overview
The Keysight 85058V 1.85 mm verification kit provides a set of standards with known
characteristics, traceable to primary standards in the Keysight Technologies calibration lab.
This set of standards is used to verify your measurement calibration and also to verify that your
PNA system is operating within its specifications. The frequency range covered by the 85058V
is from 10 MHz to 67 GHz.
Kit Contents
The 85058V verification kit includes the following items:
• 10 dB attenuator
• 40 dB attenuator
• 25
 mismatch beaded line
• 50  beaded line
• Matched thru
• Mismatched thru
• Storage box
• User’s and Service Guide (this manual)
• Service Note
• USB drive that contains factory-measured verification data for use with the PNA system
verification process
• Data sheet for each device that contains factory-measured verification data
• Anti-virus scan report
Refer to
Chapter 6 for a complete list of replaceable part numbers.
IMPORTANT Backup copies of the data sheets, anti-virus scan reports, and the data contained
on the USB drive should be made immediately upon receipt of the verification kit.
NOTE
A file containing the verification data for your kit is maintained for one year from
the time of measurement. If you lose this data, contact Keysight. Refer to
page 5-6 .
Calibration Definitions
The 85058V verification kit is intended to be used with the 85058B/E 1.85 mm calibration kits.
Prior to performing a calibration with your PNA, the calibration kit must be selected and the
calibration definitions for the devices in the kit installed in the PNA. Refer to your PNA Help
system for instructions on selecting the calibration kit and performing a calibration.